FAST DEPLOYABLE HIGH PRESSURE INFLATABLE TENT
NIXUS | PRO

LEAR MORE

PRO | SPACE EFFICIENT
Heavy duty high pressure inflatable tent for harshest weather conditions

The tough structure of PRO tents is made of heavy duty seamless pneumatic tubes of 6’’ (150 mm) diameter, working pressure in tubes may vary between 4-8 bar (60 – 120 psi). The minimum (collapse) pressure is 1.5 bar, while the safety valves are set to 8 bar. With such a wide pressure range PRO tents are the first choice for application in the harshest conditions from extreme cold areas to the desert and tropical heats. High pressure tubes of 6“ diameter and a way of their connection to the canopy are making PRO tents the most resistant inflatable structure to the strong wind and show load in their category.

PRO-ELR (Extended Load Resistance) version is available for misions with snow load requirement over 50kg/m2 in a combination with wind load of 33m/s. The general advantage of high pressure tents in comparison to low pressure solutions is their resistance to temperature fluctuations. There is no necessity of permanent pressure control or air refill. Recommended interval of internal pressure check is once a week. The canopy of PRO tent is made of opaque 1000D polyester fabric, both sides PVC coated, well waterproof, fire retardant, suitable to very low temperatures of -50°C, with an optional IR membrane.

NIXUS standard is a bicolor mode with grey color inside and olive green or sand color outside. Each tent is packed in a strong PVC waterproof bag, with an option of additional transport packing in aluminium or Clip-Lok boxes. The set of installation and repair kit is in a scope of the delivery.

NIXUS | PRO SI

NIXUS | PRO SI uses horizontal high pressure inflatable beams as tensioning elements. At the same time it may work as a spacer
and holder for sun shade cover.

NIXUS | PRO ST

NIXUS | PRO ST uses aluminium struts as tensioning elements. It is installed from inside after inflation of tent

NIXUS | PRO SH

NIXUS | PRO SH uses a combination of high pressure inflatable beams and aluminium struts as tensioning elements

NIXUS | PRO X

NIXUS / PRO X (cross) is corresponding with all  S models as an interconnection element.

Didn’t find what you were looking for?

FIND MORE

DIMENSIONS

PRO Model Width “Y” Length “x” Height “Z”
NX-PRO-51-40 16' 9" 13' 5" 9' 3"
NX-PRO-51-60 16' 9" 19' 7" 9' 3"
NX-PRO-51-80 16' 9" 26' 6" 9' 3"
NX-PRO-51-100 16' 9" 32' 6" 9' 3"
NX-PRO-61-60 20' 0" 19' 7" 10' 9"
NX-PRO-61-80 20' 0" 26' 2" 10' 9"
NX-PRO-61-100 20' 0" 32' 6" 10' 9"
NX-PRO-61-119 20' 0" 38' 8" 10' 9"
NX-PRO-X-51-51 16' 9" 16' 9" 11' 7"
NX-PRO-X-61-61 20' 0" 20' 0" 14' 1"

DOWNLOAD BROCHURE

DOWNLOAD

FREE 3D PROPOSAL

free 3D

CONTACT

ZEPELIN USA, LLC
330 S. Pineapple Ave.
Suite 110, Sarasota, Fl 34236
www.zepelin.us
info@zepelin.us


Denver office
office: 303.558.7089
mobile: 971.221.2673
jason@zepelin.us

GET SOCIAL